You have no items in your shopping cart.
Close
Search
Filters

RESTRAINT STRAPS AND BRACKETS

View as Grid List
Sort by
Display per page

1000x2.5mm Light Duty Strap Bent @ 100mm

Light Duty Restraint Straps - Bent - Galvanised 900/100 Quantity: 1 Generally used for vertical restraint such as holding down a wall plate. Designed to The Building Regulations BS 5268 Part 3 and other building standards for horizontal restraint. Manufactured from Galvanised Steel to give a high level of corrosion resistance.

1000x5mm Heavy Strap Bent @ 100mm

Restraint Straps - Heavy Duty - Bent - Galvanised 900/100 Quantity: 1 Generally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Designed to The Building Regulations BS 5268 Part 3 and other building standards for horizontal restraint. Manufactured from Galvanised Steel to give a high level of corrosion resistance.

1200x5mm Heavy Strap Bent @ 100mm

Restraint Straps - Heavy Duty - Bent - Galvanised 1100/100 Quantity: 1 Generally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Designed to The Building Regulations BS 5268 Part 3 and other building standards for horizontal restraint. Manufactured from Galvanised Steel to give a high level of corrosion resistance.

47x215 Joist Hanger

Welded Masonry Joist Hangers - Stainless Steel 47 x 225 Quantity: 1 The TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. • Conforms to Eurocode 6 and service class 3 • Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber

Universal Framing Anchor

Universal Framing Anchors - Galvanised 124 x 40 x 40 Quantity: 1 For strong nailed joints and economical secondary connectors in timber framing. Framing anchors are an effective, versatile and economical method of providing strong, mechanical joints. • The unique bending slot allows instant and accurate on-site bending for all 2 and 3 ways ties • The reversible design is ideal for a variety of connections