SAFETY & SECURITY

Slimline Ceiling and Wall Light 12W Non-Dimmable with Integrated Microwave Sensor Function The Integral LED 12W low-energy ceiling and wall light delivers 1056 lumens, 4000K white colour temperature. Its back-lit LED design provides a 120 degree beam angle and an even light distribution. Integral IP54 Slimline ceiling and wall light has a low-profile depth of only 48mm and is suitable for all indoor areas such as hallways, stairways, walls and ceilings including bathrooms (Zone 2 and 3) and covered (sheltered) external areas, such as porches. Engineered from tough, high-grade polycarbonate material. Long life expectancy of 40,000 hours based on normal usage. Each unit is supplied with an easy installation bracket and an easy-to-follow installation guide. Its integrated microwave sensor provides a 140 degree detection area within 5 to 7 meters.

Slimline Ceiling and Wall Light 18W Non-Dimmable with Integrated Microwave Sensor Function The Integral LED 18W low-energy ceiling and wall light delivers 1584 lumens, 4000K white colour temperature. Its back-lit LED design provides a 120 degree beam angle and an even light distribution. Integral IP54 Slimline ceiling and wall light has a low-profile depth of only 48mm and is suitable for all indoor areas such as hallways, stairways, walls and ceilings including bathrooms (Zone 2 and 3) and covered (sheltered) external areas, such as porches. Engineered from tough, high-grade polycarbonate material. Long life expectancy of 40,000 hours based on normal usage. Each unit is supplied with an easy installation bracket and an easy-to-follow installation guide. Its integrated microwave sensor provides a 140 degree detection area within 5 to 7 meters.

Slimline Ceiling and Wall Light 18W Non-Dimmable with Integrated 3hr Emergency and Microwave Sensor Function The Integral LED 18W low-energy ceiling and wall light delivers 1584 lumens, 4000K white colour temperature. Its back-lit LED design provides a 120 degree beam angle and an even light distribution. Integral IP54 Slimline ceiling and wall light is designed with only 48mm depth providing a low-profile style, suitable for all indoor areas such as hallways, stairways, walls and ceilings including bathrooms (Zone 2 and 3) and covered (sheltered) external areas, such as porches. Engineered from tough, high-grade polycarbonate material. Long life expectancy of 40,000 hours based on normal usage. Each unit is supplied with an easy installation bracket and an easy-to-follow installation guide. Its integrated emergency pack enhances the easy installation and maintenance. Once installed correctly in the event of mains power failure the ceiling/wall light will continue delivering light (300 lumen output) for a minimum of 3 hours. A constant green LED light is visible from the front to show the emergency mode is functional. Its integrated microwave sensor provides a 140 degree detection area within 5 to 7 meters.

Slimline Ceiling and Wall Light 18W Non-Dimmable with Integrated 3hr Emergency Function The Integral LED 18W low-energy ceiling and wall light delivers 1584 lumens, 4000K white colour temperature. Its back-lit LED design provides a 120 degree beam angle and an even light distribution. Integral IP54 Slimline ceiling and wall light has a low-profile depth of only 48mm and is suitable for all indoor areas such as hallways, stairways, walls and ceilings including bathrooms (Zone 2 and 3) and covered (sheltered) external areas, such as porches. Engineered from tough, high-grade polycarbonate material. Long life expectancy of 40,000 hours based on normal usage. Each unit is supplied with an easy installation bracket and an easy-to-follow installation guide. Its integrated emergency pack enhances the easy installation and maintenance. Once installed, in the event of a mains power failure the ceiling/wall light will continue delivering light (300 lumen output) for a minimum of 3 hours. A constant green LED light is visible from the front casing to show the emergency mode is functional.

LG8191/24HR 24HR PLUG IN TIMER Misc Wiring Access

Cooper FX002 Conventional Red Low Profile Surface Sounder This general purpose conventional surface sounder has been specifically designed to work with JSB conventional control panels. Volume is adjustable via the internal volume control and 32 different alarm tone selections are provided. Depending on the selected tone, sound levels of up to 105dB(A) can be achieved. Key Features: Low profile design Pre drilled cable entries Choice of colour, red or white 32 selectable tones Benefits: Low current, high sound output Suitable for a wide range of applications Automatic synchronisation

MICROWAVE SENSOR MAX 1000W PIR Flood

NC807C DISABLED CEILING PULL CORD ONLY Can be used to generate a standard call on an 800 Series Conventional Call System. Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled. Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm. Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made. Surface mountable. Base fits 16mm conduit and BESA centres.

ORETI PIR IP44 10W COOL WHITE he Oreti PIR LED wall light features an adjustable head which allows you to completely rotate the head so the light washes upwards, downwards or to either side. This fitting produces a high light output, comes complete with PIR sensor, LED driver and is finished in textured anthracite grey paint. Fully adjustable 350 degree rotation Complete with built in Photocell & PIR Fully Adjustable 10 - 2000 lux, 120˚ detection angle, 8m maximum range with a 10 sec - 5 min timer function Textured dark matt anthracite & clear glass Constructed from die cast aluminium alloy & glass Complete with LED driver K: 4000 Lm: 700 Lm/W: 70 Proj: 141mm H: 151mm W: 108mm

PALIN PIR 1LT WALL IP44 7W A matt black, outdoor, PIR wall light for directing light downwards. Comes with a built in PIR motion sensor with manual override making it suitable for lighting doorways, paths and for security. Constructed from stainless steel (304) & glass 10 lux - 2000 lux. 110˚ detection angle, 8m maximum range with a 5 sec - 5 min timer function 7W LED GU10 (bulb not included) Proj: 110mm H: 150mm W: 70mm

PALIN PIR 1LT WALL IP44 7W The Palin is a stainless steel, outdoor, PIR wall light for directing light downwards. It comes with a built in PIR motion sensor making it suitable for lighting doorways, paths and for security. It is IP44 rated & comes in a brushed stainless steel finish. Other colours and non PIR options are available. Complete with built in Manual override PIR 10 lux - 2000 lux. 110˚ detection angle, 8m maximum range with a 5 sec - 5 min timer function Brushed stainless steel & clear glass Constructed from stainless steel (304) & glass 7W LED GU10 (bulb not included) Proj: 110mm H: 148mm W: 68mm

PALIN PIR 2LT WALL IP44 7W The Palin range gives a stunning designer look at an affordable price. The built-in PIR has a 110˚ detection angle, 8m maximum range with a 5 sec - 5 min timer function. This fitting is IP44 rated & comes in a brushed stainless steel finish. 2 x 7W LED GU10 (bulb not included) Proj: 110mm H: 210mm W: 68mm

Photocell 20MKO Kit

PIR SENSOR LEFT-RIGHT 180 DEG PIR AND PHOTOCELL

PIR SENSOR LEFT-RIGHT 180 DEG PIR AND PHOTOCELL

PIR SENSOR UP-DOWN 180 DEG PIR AND PHOTOCELL